How To Mount A Bike Rack Without Eyelets In 2 Simple Procedures!

"As an Amazon Associate I earn from qualifying purchases."

To know how to mount a bike rack without eyelets, you need to at first consider a few things. Bike racks for bikes without eyelets that are attached on the back of a vehicle are really handy. Whether you’re riding to school or work every day or traveling Asia on your own, a rack may assist in relieving back pain. While riding with a backpack is permissible, the weight might create aches and pains over time, which isn’t ideal if you’re traveling a nation. Installing a bike rack no eyelets is the answer. They are often quite inexpensive, and even little ones may carry a significant amount of weight and mass. Normally, you would connect them straight to your bike’s eyelets. However, not everyone has eyelets. Modern motorcycles usually have these, but older ones may lack, in which case installing your rack may be more difficult.One simple option that no one ever mentions is returning the rack and purchasing one designed expressly for older bicycles without eyelets, so it’s very important to learn how to mount a bike rack without eyelets. Many of these racks are available, although they are pricier. They come with sophisticated attachments that fasten to the bike and guarantee that you cycle securely and don’t lose bags along the way. Most individuals, however, do not desire that answer since they are either attempting to save money or are obstinate! Fortunately, you can connect a normal rack for a bike without eyelets to your bike. There are several options. One, on the other hand, is preferable since it is easy, fast, and inexpensive bike, p clamps are the answer.

What is P-clamps?

P-clamps are ideal for securing racks. These clamps are made specifically to join two pipes. Where the rack legs would normally bolt onto a brazen bolt, you’ll attach the clamp and then tighten it around the bicycle itself.

How To Mount A Bike Rack Without Eyelets

As a consequence, there will be a strong grip that will maintain the bike rack for bike without eyelets in place without the need of bike eyelets.

P-Clamps: Are They Enough?

One often asked topic concerning this method is if p clamps for bike rack are adequate. If you question 10 individuals about it, you’ll most likely receive ten different replies. The fact is that it all depends on how much you’re hauling, what materials you’re utilizing, and how firmly you fastened the rack with clamps.

If you plan to travel a nation for months and anticipate carrying a large backpack and other items, this may not be the best option. To give extra strength, you would need to utilize stainless steel or titanium clamps, bolts, and nuts if you used this technique. You may also solder on an eyelets bike or purchase a specific pannier rack for road bike without eyelets with various attachments.

This method, however, is ideal for the great majority of individuals. It’s really inexpensive, perhaps less than ten bucks, and just takes a few minutes to finish. It should store tens of pounds and allow you to bring extra to work or school. Again, if you’re carrying more, utilize tougher materials.

Similarly, you must decide on the sort of material to be used. If you’re merely transporting a few books and your lunch, an inexpensive set of metal and rubber bike rack clamps will probably be enough. However, if you plan on doing a lot of traveling or hauling a lot of weight, you’ll probably require stainless steel clamps. Titanium versions are also available, which are ideal for big backpacks.

This approach should not be used if you need to transport heavy goods. It’s not the strongest, and it won’t be able to hold heavy stuff. Instead, you’ll need to purchase a rack that is particularly built to be mounted on an older bicycle that lacks the eyelets that practically all frames depend on to fit. So to know how to mount a bike rack without eyelets, keep reading.

The Procedure Of Mounting a Bike Without Eyelets:

1. Seat Stay Attachment: Typically, older bikes would lack eyelets here, necessitating the use of a clamp. To begin, secure the clamps to the top half of the seat stay just before it joins to the main seat pole. The end product should be two clamps, one on each side, to which the mounting struts may be attached.

Next, grab the rack and put it on the back of the bike as desired. This will enable you to connect the seat stay rack mounts to the clamps more quickly without accidentally placing it in the incorrect area or position.

The hole in the p clamp bike rack will go through both half of the component. You must arrange the rack mounting legs in this location so that a single bolt can be threaded through all four holes. Then, put a nut on end to tighten it up and keep everything tight. If you have a lot of room, you might also use washers. 

Washers have two functions. They can prevent bolts and nuts from scratching the clamps and the bike’s metal. They may also be used to fill empty space. If there is too much gap between the P-clamp holes on the mounting legs, you may always add extra washers to produce a tighter fit that will prevent the rack from shifting side to side.

Throughout the procedure, you’ll want to make sure that the bike rack is level with the ground. This is not an easy task. It’s a good idea to place a bubble level on the rack to maintain the right angle. Alternatively, many smartphones will have apps that can assess the angle to see whether it’s level to the ground, preventing things on the rack from sliding. 

2. Putting the Rack Legs Together: Now that the top rack is attached to the bike, it’s time to attach the bottom rack, which will carry the bulk of the weight. This is the most crucial connection; therefore, if you’re employing a lot of different components, you should use your strongest clamps here.

Our objective is to attach the rack legs to the bottom of the seat so that it remains metal where it links to the wheel. The length of the bolt is a major consideration. A bolt that is excessively long can get stuck in the wheel’s spokes, causing damage. You should locate a bolt that is the correct size as part of your preparation. We’ll now repeat the processes from the previous section. Attach the clamp to the bike’s metal and align them so that one is on each side of the wheel and they are properly aligned. It’s critical to keep them at the same height. Another suggestion is to keep them as low as possible since this would reduce the effect of any slippage.

Pull the rack’s legs down and into place while the clamps are still in place. They should be positioned in the center of each clamp so that you can thread a bolt through them as you did before. Once the bolt is through, secure each with a strong metal bolt, preferably stainless steel, to keep the rack erect and load-bearing.

After that, you should test the bike to see whether it can withstand a large load. Use a bubble level to double-check that you’ve put it at the proper angle. This is simply adjustable by releasing the bolts and moving the clamps up and down. 

Let’s Watch a Video!


Bike racks are fantastic accessories that greatly boost the practicality of bikes, particularly for touring bikers. A rear bike rack may enhance your travel experience and transform your bike into a useful carrier. You won’t have to ride with a rucksack on your back, which would be exhausting and put needless pressure on your back. Due to the fact that not all traditional and contemporary bikes have eyelets for mounting racks on bike without eyelets. Some manufacturers delete these components, presumably to keep their bikes as light as possible. If your bike doesn’t have rack eyelets or you don’t want to braze them, you may quickly install a bike rack using the handy attachments that come with P-clamps, which are the remedy for practically any bike-related issue and can be found in almost every home hardware shop in the country. They are available in a wide range of fixtures, sizes, and materials. To be sure you’re obtaining the appropriate clamps, measure the diameter of the metal on your bike. Hopefully, now you know how to mount a bike rack without eyelets.

From getting knowledge about bikes and bike-related accessories, you can contact us without taking any hassle. We are always open for you to make your buying decision more perfect. Thank You!

Sharing Is Caring:

Leave a Comment